L 3 Features
3-78 Features
Line Access, CO Line Group
Description Allows the extension user to dial access a CO line group. An idle
line is selected from the CO line group. To specify a CO line
group, dial the feature number (the default setting is “8”) and a
desired CO line group number (1 through 8). A digital proprietary
telephone user can also specify a CO line group by pressing a
Group-CO button.
Conditions • Each extension is subject to system programming items for CO lines
available to access.
• An idle line is selected in sequence from the lines in the specified CO
line group.
• Group-CO buttons must be programmed prior to use.
• If Idle Line Preference – Outgoing is set on the telephone, the user can
access an idle line only by going off-hook.
Programming References
Section 4, System Programming,
[005] Flexible CO Button Assignment
[100] Flexible Numbering, CO line group line access
[211] Dial Start Time
[400] CO Line Connection Assignment
[401] CO Line Group Assignment
[605]–[606] Outgoing Permitted CO Line Assignment — Day / Night
Station Programming.......................................................User Manual,
Flexible Button Assignment – Group-CO (G-CO) Button
Feature References Section 3, Features,
Button, Group-CO (G-CO) CO Line Group
CO Line Connection
Assignment – Outgoing
Operation References DPT Features, SLT Features;
—User Manual Outward Dialing – Line Access, CO Line Group
To Next Page
Loading...
Need help?
General
