3 Features P
*: Available for KX-TD1232 only. Features 3-95
Pickup Dialing
Description Allows an extension user to make an outgoing call by going off-
hook, if the user has previously stored the telephone number. This
feature is also known as Hot Line.
Conditions • A LD telephone without the “#” button cannot program this feature.
For programming the phone number, replace the LD telephone to the
telephone with the “#” button temporarily.
• The user uses a feature number to enable or disable pickup dialing.
• If the feature is enabled and the user goes off-hook, dial tone is
generated for the waiting time and then dialing starts. During the
waiting time the user can dial another party, overriding the Pickup
Dialing function.
• If the user answers an incoming call or retrieves a call on hold, the
Pickup Dialing feature does not work.
Programming References
Section 4, System Programming,
[100] Flexible Numbering, Pickup dialing program set / cancel
[204] Pickup Dial Waiting Time
Feature References None
Operation References DPT Features, SLT Features;
—User Manual Pickup Dialing (Hot Line)
Power Failure Restart
Description Returning on electricity, the system restarts the stored data
automatically. Before restarting, the system records the error logs
if necessary.
Conditions • If System Connection* is established, the Slave system makes a copy
of the restored data of the Master system.
• In the event of a power failure, system memory is protected by the
factory-provided lithium battery. There is no memory loss except the
memories of Camp-On and Call Park.
Programming References
No programming required.
Feature References None
To Next Page
Loading...
Need help?
General
