S 3 Features
3-112 Features
A maximum capacity of the system is as follows:
Item Maximum Quantity Maximum Quantity
(Single System) (System Connection)
CO Line 12 24
Extension Jack 32 64
DSS Console 4 8
Doorphone 2 4
Door Opener 2 4
External Pager 2 4
Music Source 2 4
Conditions • The following resources can be used by either system:
(a) External pagers
(b) Music sources used for Music on Hold
(c) Music sources used for Background Music (BGM)
(d) Station Message Detail Recording (SMDR); EIA (RS-232C)
ports
(e) Call Parking areas
• System Inter Connection Card (KX-TD192), optional expansion cards
to connect both systems, must be installed for this feature.
Connection References Section 2, Installation,
2.4.10 System Connection
Programming References
No programming required.
Feature References None
Operation References Not applicable.
System Data Default Set
Description This system permits re-initialization of system-programmed data.
If all the programmed data is cleared, the system will restart with
the default setting.
Conditions The default setting for each programming item is listed in Section 5.2,
“Default Values.”
Programming References
No programming required.
To Next Page
Loading...
Need help?
General
