3 Features L
Features 3-77
Operation References Not applicable.
Line Access, Automatic
Description Allows the extension user to dial the automatic line access number
and access an idle line from the CO line groups assigned for the
extension. The digital proprietary telephone user can use the Loop-
CO button in place of the access number.
Conditions • This feature functions with Automatic Route Selection (ARS), if ARS
is enabled. If so, the least expensive route is automatically selected.
• Each extension is subject to system programming items for CO lines
available to access.
• An idle CO line is selected from the CO line groups assigned to the
station. If one CO line group is available, an idle line is selected from
that group. If multiple CO line groups are available, the CO line group
hunting sequence is determined by system programming.
• This feature requires a CO button (G-CO, L-CO or S-CO) assignment
on a digital proprietary telephone (DPT). Dialing the line access code
selects a CO button on a DPT according to the priority:
S-CO > G-CO > L-CO on a hunted CO line group
• If Idle Line Preference – Outgoing is set on the telephone, the user can
access an idle line only by going off-hook.
• The system waits for a programmed time before dialing after a CO line
is seized.
Programming References
Section 4, System Programming,
[100] Flexible Numbering, Automatic line access / ARS
[103] Automatic Access CO Line Group Assignment
[211] Dial Start Time
[400] CO Line Connection Assignment
[605]–[606] Outgoing Permitted CO Line Assignment — Day / Night
Feature References Section 3, Features,
CO Line Connection Assignment – Outgoing
Operation References DPT Features, SLT Features;
—User Manual Outward Dialing – Line Access, Automatic
To Next Page
Loading...
Need help?
General
