M 3 Features
3-84 Features
Microphone Mute
Description Allows the digital proprietary telephone user to turn off the
microphone, for privacy reasons.
Conditions • This is effective for the microphone only; your voice will only be
muted during a handsfree conversation.
• The user can hear the other party’s voice during Microphone Mute.
Programming References
No programming required.
Feature References None
Operation References DPT Features,
—User Manual Microphone Mute
Mixed Station Capacities
Description This system supports a wide range of telephone sets, not only
Digital Proprietary Telephones (DPT) in the Digital Super Hybrid
System, but also single line LD telephones (10 pps / 20 pps,
employing dial pulse signals) and single line MF4 telephones. The
super hybrid method used in this system allows any telephone to be
connected to an extension jack without an adaptor.
Conditions If a telephone is replaced by another one, the stored data (such as feature
button storage) is held for the new one.
Connection References
Section 2, Installation,
2.3.3 Extension Connection
2.4.4 8-Station Line Unit Connection
Programming References
No programming required.
Feature References None
Operation References Not applicable.
To Next Page
Loading...
Need help?
General
