4.3 System Programming
One-Touch Transfer by DSS Button
4-42 System Programming
108
Description Enables or disables the function of automatically holding the
outside call when a DSS button on the DSS Console or digital
proprietary telephone is pressed.
Selection Enable / Disable
Default Enable
Programming 1. Enter 108.
Display: DSS Auto Hold
2. Press NEXT.
Display example: Auto HLD:Enable
3. Keep pressing SELECT until the desired selection is
displayed.
4. Press STORE.
5. Press END.
Conditions This assignment applies to all DSS buttons on all DSS Consoles and on
all digital proprietary telephones in the system.
Feature References Section 3, Features,
One-Touch Transfer by DSS Button
To Next Page
Loading...
Need help?
General
