C 3 Features
3-26 Features
Programming References
Section 4, System Programming,
[005] Flexible CO Button Assignment
[100] Flexible Numbering, Call forwarding / do not disturb set / cancel
[202] Call Forwarding – No Answer Time
Station Programming.......................................................User Manual,
Flexible Button Assignment – FWD/DND Button
Feature References None
Operation References DPT Features, SLT Features;
—User Manual Call Forwarding — No Answer
Call Forwarding – to CO Line
Description Calls directed to your extension will be sent to an external
destination. The outside telephone number must be pre-
programmed.
Conditions • Types of calls which are forwarded by this function are:
Outside calls – DIL 1:1; DID; DDI
Intercom calls – Extension; Transfer
• The forwarding
extension’s Toll Restriction, Automatic Route
Selection and Account Code Entry requirements still apply.
• Although calls are forwarded, Message Waiting is not. The MESSAGE
button indicator is lit on the originally called extension.
• If an extension in Call Forwarding is also in a Hunt group a call
directed to the extension is forwarded. Station Hunting still applies for
calls directed to other extensions in the Hunt group.
• Setting this function cancels other Call Forwarding or Do Not Disturb
functions, if any.
• Class of Service programming determines the extensions that are able to
perform the function.
• If an extension is limited by the program [502] “Extension-to-CO Line
Call Duration Limit” according to its Class of Service, the extension is
unable to forward an outside call to a CO line.
• If a call between an extension and an outside party is established by this
feature, the duration of the call period can be restricted depending on
the setting of a system timer.
Programming References
Section 4, System Programming,
[005] Flexible CO Button Assignment
[100] Flexible Numbering, Call forwarding / do not disturb set / cancel
To Next Page
Loading...
Need help?
General
