4.10 Resource Programming
Music Source Use
803
System Programming 4-129
Description Assigns the music source to be used for Music on Hold and
Background Music (BGM).
Selection • Hold / BGM
• Music source number: KX-TD816 – 1 / No Use
KX-TD1232 – 1 through 4 / No Use
Default Hold and BGM – Music 1
Programming 1. Enter 803.
Display: Music Source Use
2. Press NEXT to program Music on Hold.
Display example: Hold:Music1
3. Enter a music source number.
To select no music source, press CLEAR.
To change the current entry, enter the new music source number.
4. Press STORE.
5. Press NEXT to program BGM.
Display example: BGM :Music1
6. Enter a music source number.
To select no music source, press CLEAR.
To change the current entry, enter the new music source number.
7. Press STORE.
8. Press END.
Conditions • The music source is a user-supplied item. For KX-TD816, one music
source can be installed. For KX-TD1232, two music sources can be
installed per system. Music sources 1 and 2 are connected to the Master
System, 3 and 4 are to the Slave, if available. Any music source can be
used by either system.
• The system is provided with an internal music source. By default
setting external music source is used as Music Source 1. Program [990]
“System Additional Information, Field (20)” is used to select internal
music source for Music Source 1.
• To disable music, press CLEAR at steps 3 and 6.
• Program [804] “External Pager BGM” is used to enable / disable BGM
for each external pager.
Feature References Section 3, Features,
Background Music (BGM) Music on Hold
Background Music (BGM) – External
To Next Page
Loading...
Need help?
General
