4.11 Option Programming
COS Additional Information
991
System Programming 4-143
Description (1) Sets the number of digits allowed to dial out during an outside call
on a Class of Service (COS) basis. If an outside party hangs up and
the extension user tries to dial out still on the CO line, the system
will disconnects the line at the time the assigned digits are dialed.
This program can be added if CPC Signal Detection is not provided
by the CO.
The Field (1) shown below is used to enter your selection.
(2) Enables or disables the Call Forwarding – Follow Me feature on a
COS basis.
The Field (2) below is used to enter your selection.
Selection • COS number: 1 through 8, ( =all COS)
• Field number : 1 or 2
• Selection for field (1):
0000: no limit / 0001: 1 digit / 0010: 2 digits / 0011: 3 digits /
0100: 4 digits / 0101: 5 digits / 0110: 6 digits / 0111: 7 digits /
1000: 8 digits / 1001: 9 digits / 1010: 10 digits / 1011: 11 digits /
1100: 12 digits / 1101: 13 digits / 1110: 14 digits / 1111: 15 digits
• Selection for field (2): 0 : disable / 1 : enable
Default Field 1: All COS – 0000 / Field 2: All COS – 1
Programming 1. Enter 991.
Display: COS Add Inf.
2. Press NEXT.
Display: COS NO?->
3. Enter a COS number.
Display example: 1111111111110000
4. Keep pressing or to move the cursor to the desired
field.
Display
example
1111111111110000
Field number
(unused) (2) (1)
↓ ↓ ↓
To Next Page
Loading...
Need help?
General
