3 Features D
Features 3-47
• A new incoming call will not arise at the extension which is keeping a
call on Consultation Hold. The extension is regarded as busy.
• If a calling party is placed on hold, music is sent to the party, if
available (Music on Hold).
• If a call on hold is not retrieved in a specific period of time, Transfer
Recall starts.
• If an outside call is placed on hold and not retrieved in 30 minutes, it is
automatically disconnected.
Programming References
Section 4, System Programming,
[201] Transfer Recall Time
[990] System Additional Information, Fields (2), (5)
Feature References Section 3, Features,
Call Splitting Call Transfer, Unscreened
Call Transfer, Screened – to Conference
CO Line Conference, Unattended
Call Transfer, Screened – to Music on Hold
Extension
Operation References Not applicable.
Data Line Security
Description Data Line Security is a function that can be set on individual
extensions. Once set, communication between the extension and
the other end is protected from any signal such as Call Waiting,
Hold Recall. Data equipment or a facsimile may be connected to
an extension jack so that the user can perform data
communications. During the communication, Data Line Security
maintains secure data transmission against tones.
Conditions If one extension in a conversation has set Data Line Security, it applies to
the both extensions.
Programming References
Section 4, System Programming,
[100] Flexible Numbering, Data line security set / cancel
Feature References None
Operation References DPT Features, SLT Features;
—User Manual Data Line Security
To Next Page
Loading...
Need help?
General
