P 3 Features
3-96 Features
Operation References Not applicable.
Power Failure Transfer
Description If a power failure should happen, or during a system-off-line state,
single line telephone (SLT) which is connected the Power Failure
jack should be connected straight to specific CO lines.
Connections between the CO lines and the SLTs are as follows:
KX-TD816 : CO 1 is connected to extension jack 1
CO 2 is connected to extension jack 2
CO 5 is connected to the power failure transfer jack
KX-TD1232 : CO 1, 2 and 9 are connected to the power failure
transfer jacks of Master System
CO 13, 14 and 21 are connected to the power failure
transfer jacks of Slave System
Conditions • Only SLT is available during a power failure.
Connection References
Section 2, Installation,
2.3.2 CO Line Connection (KX-TD816 : CO 1 through CO 4)
2.4.2 CO Line Connection (KX-TD1232 : CO 1 through CO 8)
2.4.5 4-CO Line Unit Connection
2.4.6 4-DID Line Unit Connection
2.5 Power Failure Transfer Connection
Programming References
No programming required.
Feature References Section 3, Features,
Power Failure Restart
Operation References Not applicable.
Pulse to Tone Conversion
Description This feature allows the extension user to change from pulse dial to
tone (DTMF) dial so that the user can access special services such
as computer-accessed long distance service.
To Next Page
Loading...
Need help?
General
