4.4 Timer Programming
Call Forwarding – No Answer Time
4-58 System Programming
202
Description Sets the number of rings for the Call Forwarding – No Answer
feature. If a call is not answered before the programmed number of
rings, the call is forwarded to the destination.
Selection Number of rings: 1 through 12
Default 3 rings
Programming 1. Enter 202.
Display: No Answer Time
2. Press NEXT.
Display example: Time: 3 rings
3. Enter the number of rings.
To change the current entry, press CLEAR and the new number of
rings.
4. Press STORE.
5. Press END.
Conditions • One ring is equivalent to five seconds.
• This timer is also used for Intercept Routing.
• You cannot leave the entry empty.
Feature References Section 3, Features,
Call Forwarding – Busy / No Answer
Call Forwarding – No Answer
To Next Page
Loading...
Need help?
General
