4-2 System Programming
4.1 General Programming Instructions
Default Setting
This system has a default factory setting. If any of the
programming needs to be changed, you will find the necessary
information in Section 3, “Features.” This makes the system very
simple to install and customize as required by the customer. Any
required changes can be written on “Programming Tables.”
Required Telephone Set
One of the following digital proprietary telephone (DPT) is
required for system programming: KX-T7235, KX-T7230
Extensions Used for Programming
Connect one of the above-mentioned telephone sets to either of the
following:
• Jack number 1
• Jack programmed as a manager extension
To assign the manager extension, see Section 4.2 [006] “Operator /
Manager Extension Assignment.”
User Programming Mode
Some programming items are allowed to any display DPT user in
the system. See Section 4.1.4 “User Programming Mode.”
To Next Page
Loading...
Need help?
General
