3 Features D
Features 3-55
(f) If Call Forwarding – to CO Line number 91201431 is
assigned: FWD(CO) 91201431
• If the display characters exceed 16 digits, the mark “&” is shown at the
right-hand edge.
• This is used to display the data programmed for each PF
(Programmable Feature), DSS, SAVE, or REDIAL button. If Full One-
Touch Dialing is enabled on the telephone Full One-Touch Dialing will
be active instead.
Programming References
No programming required.
Feature References None
Operation References Not applicable.
Display, Self-Extension Number
Description Allows the display proprietary telephone user to display their own
jack number and extension number in station programming mode.
Conditions Display example
If the jack number is 02 and the extension number is 202:
Jack02<=>EXT202
Programming References
Station Programming.......................................................User Manual,
Self-Extension Number Confirmation
Feature References None
Operation References Not applicable.
To Next Page
Loading...
Need help?
General
