L 3 Features
3-80 Features
Programming References
Section 4, System Programming,
[005] Flexible CO Button Assignment
[211] Dial Start Time
[400] CO Line Connection Assignment
[605]–[606] Outgoing Permitted CO Line Assignment
— Day / Night
Station Programming.......................................................User Manual,
Flexible Button Assignment – Single-CO (S-CO) Button
Feature References Section 3, Features,
Button, Single-CO (S-CO) CO Line Connection
Assignment – Outgoing
Operation References DPT Features,
—User Manual Outward Dialing – Line Access, Individual
Line Preference – Incoming (No Line / Prime Line / Ringing Line)
Description A digital proprietary telephone user can select the method used to
answer incoming calls from the following three line preferences:
(1) No Line Preference
No line is selected when you go off-hook. You must select
a line to answer.
(2) Prime Line Preference
You can assign a prime line beforehand and answer a call
on that line, when multiple calls are received
simultaneously.
(3) Ringing Line Preference
When you go off-hook, you answer the call ringing at your
telephone.
Conditions • Setting a new line preference feature cancels the previous setting.
• If Prime Line Preference is selected and an incoming call arrives from a
line other than the prime line, it cannot be answered just by going off-
hook. The Prime Line should be assigned to the Single-CO button.
• If Ringing Line Preference is selected, going off-hook does not answer
a line programmed for “no ring” even though there is an incoming call.
Going off-hook during the delay time does not answer a line
programmed for “delayed ringing.”
• A single line telephone is always set to Ringing Line Preference and
cannot be changed.
To Next Page
Loading...
Need help?
General
