4.8 Extension Programming
Extension Group Assignment
602
System Programming 4-117
Description Assigns each extension to an extension group. Extension groups
are used for Group Call Pickup, Station Hunting, and Paging –
Group. This program is also used to assign all Voice Mail ports /
Automated Attendant ports of your Voice Processing System, if
available, to an extension group.
Selection • Jack number: KX-TD816 – 01 through 16, (-1 / -2),
KX-TD1232 – 01 through 64, (-1 / -2),
( =all jacks, -1 = first part, -2 = second part)
• Extension group number: 01 through 16
Default All jacks-1/2 – Extension group 1
Programming 1. Enter 602.
Display: EXT Group Asn
2. Press NEXT.
Display: Jack NO?->
3. Enter a jack number.
To enter jack number 01, you can also press NEXT.
To select the second part (-2), press NEXT after entering a jack
number.
Display example: #01-1:EXG1
4. Enter the extension group number.
To change the current entry, enter the new extension group number.
5. Press STORE.
6. To program another jack, press NEXT or PREV, or
SELECT and the desired jack number.
7. Repeat steps 4 through 6.
8. Press END.
Conditions • There is a maximum of 16 extension groups. Each extension can
only belong to one group.
• In the case of KX-TD1232, jack numbers 01 through 32 are for the
Master System and 33 through 64 are for the Slave, if available.
• For an explanation of jack numbering, see “Rotation of jack number”
on page 4-7.
• To assign all jacks to one extension group, press the key at step 3.
In this case, the display shows the contents programmed for Jack 01.
Feature References Section 3, Features,
Call Pickup, Group Station Hunting
Extension Group Voice Mail Integration
Paging – Group
To Next Page
Loading...
Need help?
General
