A 3 Features
3-4 Features
Operation References DPT Features, SLT Features;
—User Manual Account Code Entry
Alternate Calling – Ring / Voice
Description This system offers two methods of Intercom Calling – Ring-
Calling and Voice-Calling. Ring-Calling informs the called party
of an incoming call with a ring tone, while the Voice-Calling uses
the calling party’s voice. The called extension user, if a proprietary
telephone, can select tone or voice calling. If the user selects
Voice-Calling, the calling party can talk to the user immediately
after confirmation tone. The calling extension user is able to
change the calling method pre-selected once at a time by the called
extension by pressing “ ”; Ring-Calling can be switched to
Voice-Calling, and vice versa. This operation is available for both
proprietary and single line telephone users during calling.
Conditions Single line telephone users receive calls with Ring-Calling only.
Programming References
Station Programming.......................................................User Manual,
Intercom Alerting Assignment
Feature References Section 3, Features,
Handsfree Answerback
Operation References DPT Features, SLT Features;
—User Manual Alternate Calling — Ring / Voice
Answering, Direct CO Line
Description Allows the proprietary telephone user to answer an incoming call
by simply pressing the appropriate CO button without lifting the
handset or pressing the SP-PHONE / MONITOR button.
Conditions This feature permits the user to specify the desired line to be answered
if multiple incoming lines are ringing.
Programming References
No programming required.
To Next Page
Loading...
Need help?
General
