3 Features D
Features 3-57
Conditions • If your digital proprietary telephone (DPT) is not supplied with the
FWD/DND button, it can be assigned on a flexible button.
• DND does not work for the following calls: doorphone calls; recalls for
hold / Timed Reminder alarm or calls directed by Intercept Routing.
• Setting DND cancels any Call Forwarding feature currently set.
• A DPT user in DND mode can answer a call by pressing the button
showing the arrival of the call.
• An extension in DND mode can be called by other extension users who
are allowed to override DND in their Class of Service (Do Not Disturb
Override).
Programming References
Section 4, System Programming,
[005] Flexible CO Button Assignment
[100] Flexible Numbering, Call forwarding / do not disturb set / cancel
Station Programming.......................................................User Manual,
Flexible Button Assignment – FWD/DND Button
Feature References Section 3, Features,
Do Not Disturb (DND) Override
Operation References DPT Features, SLT Features;
—User Manual Do Not Disturb (DND)
Do Not Disturb (DND) Override
Description Permits the pre-assigned extension user to call another user who
sets the Do Not Disturb feature. Dialing “2” enables the caller to
override the DND programmed on the called extension’s telephone
and causes the telephone to ring.
Conditions Class of Service (COS) programming determines the extension users who
can perform DND Override.
Programming References
Section 4, System Programming,
[507] Do Not Disturb Override
Feature References Section 3, Features,
Do Not Disturb (DND)
Operation References DPT Features, SLT Features;
—User Manual Do Not Disturb (DND) Override
To Next Page
Loading...
Need help?
General
