Digital setups Digital channel threshold and position
To use
Click in the Threshold e ntry box and use the keypad to enter a value or use the multipurpose knobs to
select a voltage level.
Behavior
The voltage threshold level determines when a voltage level on a digital channel is considered to be
alogichig
h and a logic low.
Set d igital channel position
NOTE. The Digital Channel Position option is available only o n MSO5000 and MSO70000C Series
instruments and DPO5000 Series instruments with option MSOE installed.
From the Digital menu, select Digital Setup and use the Position entry box to move the digital channel
vertically in the display.
NOTE. The instrument displays the Position entry box when you turn on the digital channel.
To us
e
Double-click in the Position entry box, and use the keypad or the multipurpose knobs to adjust the
pos
ition of the digital channel.
What do you want to do next?
Learn about setting up digital signals. (see page 94)
L
earn more about digital setups.
(see page 87)
Learn about bus setups. (see page 95)
Learn about bus configuration. (see page 148)
90 DSA/DPO70000D, MSO/DPO/DSA70000C, DPO7000C, and MSO/DPO5000 Series
To Next Page
Loading...
Need help?
General
