Trigger setups Set up a Setup and Hold trigger
Set up a Setup and Hold trigger
From the Trig menu, select Setup/Hold Setup.
Overview
Use the controls in this window to set up the Setup and Hold violation trigger parameters.
To use
For inform
ation on the controls, click the buttons.
NOTE. The Trigger Setup/Hold screen on DPO/DSA Series ins t rument is same as that on an
MSO/DPO5000 and MSO70000C Series instrument except for the source selection and Trigger if
Setup/Hold Qualification options.
In some instruments, the source selection is a drop-down list and the Trigger if Setup/Hold Qualification
option has Occurs and Logic.
In other instruments the source selection includes a combo list and a Select button. The Trigger if
Setup/Hold Qualification option has Occurs, Logic, and Occurs And.
The following Trigger Setup/Hold screen appears on MSO70000C Series instruments:
DSA/DPO70000D, MSO/DPO/DSA70000C, DPO7000C, and MSO/DPO5000 Series 431
To Next Page
Loading...
Need help?
General
