Tektronix DPO5000 Series User Manual

Trigger setups Set up a FLEXRAY bus trigger
Click the Trigger On selections to view their parameters.
What do you want to do next?
Learn about bus setups. (see page 95)
Set up a FLEXRAY bus trigger
NOTE. The Bus Trigger Control Window for FLEXRAY Serial option is available only on instruments
with option SR-AUTO.
From the Trigger menu, select Bus setup.
Overview
Use the controls to set up the FLEXRAY Bus parameters.
To use
For information on the controls, click the buttons.
To use
Click the Trigger Type box and select Bus from the drop-down list.
Click the Bus box and select the bus number or name from the drop-down list.
NOTE. You have the option to add user-defined label for bus sources.
Click the Logic Thresholds Setup button to set the voltage threshold levels for the channels in the bus.
410 DSA/DPO70000D, MSO/DPO/DSA70000C, DPO7000C, and MSO/DPO5000 Series

Tektronix DPO5000 Series Specifications

General

Brand	Tektronix
Model	DPO5000 Series
Category	Test Equipment
Language	English