Bus setups Set up a MIL-1553 serial bus
Learn how to set up a PCIe Serial Bus (see page 586)
Learn how to set up a CAN Bus (see page 115)
Learn how to set up a LIN Serial Bus (see page 587)
Learn how to set up a MIL-1553 Bus (see page 120)
Learn how to set up an Ethernet Bus (see page 121)
Learn how to track down serial bus anomalies. (see page 590)
Learn how to view analog characteristics of a digital waveform. (see page 579)
Learn how to trigger on a bus. (see page 658)
Set up a MIL-1553 serial bus
NOTE. MIL-1553 serial bus setup is available only o n instruments with the SR-AERO option.
From the Bus Setup window, select Serial from the Bus Type list and then select the MIL-1553 Serial bus
type.
For information on the controls, click the buttons.
To use
To change the input for a component, click the Input and select a channel from the cascading lists.
To set the serial bus type, click the Serial Bus Type entry box and select from the drop-down list.
To change a voltage threshold level, click the Threshold entry box and use the keypad to enter a value
or use the multipurpose knobs to select a voltage level.
To select the polarity, click the Polarity and select the polarity from the drop-down list.
To change the response time maximum and minimum, click a Response Time entry box and use the
keypad to enter a value or use the multipurpose knobs to select a time.
120 DSA/DPO70000D, MSO/DPO/DSA70000C, DPO7000C, and MSO/DPO5000 Series
To Next Page
Loading...
Need help?
General
