Mask testing setups Configure mask autoset
To use
Click the Lock Mask to Waveform button to turn it on and off.
Click the Masks button to go to the Mask Testing control window.
Behavio
r
When the Lock Mask to Waveform button is turned on, any changes you make to the scale, vertical
positi
on or horizontal position will be reflected in the mask. Turning on Highlight Hits displays the hits in
a different color so they can be easily seen. W hen you click the Mask button this window closes, and
the Mask Setup control window opens.
What do you want to do next?
Go to t
he Mask Setup control window.
(see page 209)
Learn more about mask configuration. (see page 214)
Configure mask autoset
From the Mask menu, highlight Mask Configure; then select Autoset. From the Mask Testing control
window, click the Autoset Config button.
Use this control window to set the vertical, horizontal, and trigger autoset parameters, activate autofitor
autoset, choose the autoset mode, return to the default autoset configuration, or go to the Mask Testing
c
ontrol window.
For information on the controls, click the buttons.
214 DSA/DPO70000D, MSO/DPO/DSA70000C, DPO7000C, and MSO/DPO5000 Series
To Next Page
Loading...
Need help?
General
