Mask testing setups Use mask display controls
Use mask display c ontrols
From the Mask menu, select Mask Setup; then open the Masks tab.
To use
Click the On/Off control to turn the mask display on or off.
Click the Config control to activate the Mask Confi guration Display (see page 213) control window.
Behavior
When the On/Off control is on, the mask is displayed on the graticule. When the On/Off control is off, the
mask is not displayed.
Click the Config button to replace the Mask Testing control window with the Mask Configuration Display
control window.
What do you want to do next?
Learn about the Mask Configuration Display control window. (see page 213)
Learn about mask type s. (see page 209)
Lea
rn about mask alignment.
(see page 217)
Go to the Mask Setup control window. (see page 209)
Mask configuration control window - Display
From the Mask menu, highlight Mask Configure; then select Display. From the Mask Testing control
window, click the Display Config button.
Overview
Use this control window to set whether changes in the scale will also be made in the m ask. You can also
use this control window to return to the Mask Setup control window.
DSA/DPO70000D, MSO/DPO/DSA70000C, DPO7000C, and MSO/DPO5000 Series 213
To Next Page
Loading...
Need help?
General
