Trigger setups Set up an 8B10B bus trigger
Learn about digital setups. (see page 87)
Set up an 8B10B bus trigger
NOTE. The Bus Trigger Control Window for 8B10B Serial option is available only on instruments with
option SR-810B.
From the Trigger menu, select Bus setup.
Overview
Use the controls to set up the 8B10B Bus parameters.
To use
For information o n the controls, click the buttons.
To use
Click the Trigger Type box and select Bus from the drop-down list.
Click the Bus box and select the bus number or name from the drop-down list.
NOTE. You have the option to add user-defined label for bus sources.
Click the Logic Thresholds Setup button to set the voltage threshold levels for the channels in the bus.
Select the type of bus cycle or activity to use as the trigger from the Trigger On drop-down list.
For some Trigger O n selections, you must set additional fields to define other parameters such as for
a Pattern.
DSA/DPO70000D, MSO/DPO/DSA70000C, DPO7000C, and MSO/DPO5000 Series 393
To Next Page
Loading...
Need help?
General
