Horizontal and acquisition s etups Set Autoset preferences
Set Autoset preferences
From the Utilities menu, select User Preferences and the Prompts tab.
Overview
You can set the instrument to display a prompt asking you to confirm the requested action before applying
the Autoset function.
To use
Select User Preferences from the Utilities menu to display the Prompt Before Action (see page 555)
window.
Click Autoset to toggle between Off and On. Off immediately performs an Autoset when the Autoset
button is pushed. On displays a prompt when the Autoset button is pushed.
Click Close to save your selection.
Undo an autoset
Press Autoset on the instrument front panel to undo the last autoset operation.
Overview
The Autoset Undo window opens automatically following an autoset. Use this control to undo the last
autoset operation.
To use
Click Undo. Only the parameters set by the last autoset are undone. The settings you have changed
since the last autoset (that are not controlled by Autoset) remain unchanged.
Click OK to close the window and proceed without an Undo.
DSA/DPO70000D, MSO/DPO/DSA70000C, DPO7000C, and MSO/DPO5000 Series 185
To Next Page
Loading...
Need help?
General
