Tektronix DPO5000 Series User Manual

Trigger setups Set up an Ethernet bus trigger
Set up an Ethernet bus trigger
NOTE. The Bus Trigger Control Window for Ethernet Serial option is available only on DPO/MSO5000
Series instr
uments with option SR-ENET.
From the Trigger menu, select Bus setup.
Overview
Use the controls to set u p the Ethernet Bus parameters.
To use
For infor
mation on the controls, click the buttons.
To use
Click the Trigger Type box and select Bus from the drop-down list.
Click the Bus box and select the bus number or name from the drop-down list.
Click the Logic Thresholds Setup button to set the voltage threshold levels for the channels in the bus.
Se
lect the type of bus cycle or activity to use as the trigger from the Trigger On drop-down list.
For some Trigger O n selections, you must set additional fields to define other parameters such as for
a
TCP Header.
DSA/DPO70000D, MSO/DPO/DSA70000C, DPO7000C, and MSO/DPO5000 Series 415

Tektronix DPO5000 Series Specifications

General

Brand	Tektronix
Model	DPO5000 Series
Category	Test Equipment
Language	English