Tektronix DPO5000 Series User Manual

Oscilloscope Reference Recall a template waveform
Recall a template waveform
Use this procedure to recall a template waveform to a reference location.
1. From the File menu click Recall.
2. Under Reca ll What: click Waveform, and then select the waveform you want to recall.
3. Select Ref <1–4> from the Destination drop-down list.
4. Click Recal
l.
Recall a mask
Use the Mask Edit Setup control window to recall a mask.
1. From the Mask menu, select Mask Edit Setup.
2. In the Mask Edit control window, click the Recall button.
3. In the Recall dialog box, click User Mask; then select the mask you want to recall.
4. Click Recall to recall the mask.
NOTE. The d efault folder for saving masks is C:\Users\[Username]\Tektronix\TekScope\Masks. If you
saved masks in a different folder, click the Look in drop-down list to find the folder where your masks
are saved.
Hor
izontal modes
Fro
m the Horiz /Acq menu, select Horizontal/Acquisition Setup; then open the Horizontal tab
(see
page 177).
Overview
The instrument has three horizontal modes. The default mode is Automatic; the default record length
limit is 200,000 points.
900 DSA/DPO70000D, MSO/DPO/DSA70000C, DPO7000C, and MSO/DPO5000 Series

Tektronix DPO5000 Series Specifications

General

Brand	Tektronix
Model	DPO5000 Series
Category	Test Equipment
Language	English