Installation and Maintenance Manual - Aastra 5000 AMT/PTD/PBX/0058/4/6/EN
Description des sous-ensembles 01/2011 Page 123
• A card is extracted as follows (see Figure 4.1 ):
• Turn the two 1/4 turn locks outward to unlock the card.
• Pull the two locks to extract the card.
4.1.2 Loading CLX cards
• The flash memory on CLX cards contain the start-up software; an image of the
application software can be inserted, installed, etc. on it.
• They can be fully loaded during an update using a BOF3 card (see section1.3,
Document [3]).
To Next Page
Loading...
Need help?
General
