AMT/PTD/PBX/0058/4/6/EN Installation and Maintenance Manual - Aastra 5000
Page 472 01/2011 INSTALLING A5000 SERVER (Non-redundant)
10.4 Declaring the licences for virtual A5000 server
A5000 Server may be virtualised in R5.2 SP1 and later. In this case, the dongle is equally
virtual and is delivered with the A5000 Server package.
For a first installation, the licence is not otained directly and depends on the installation
code to be generated from AMP.
This installation code is specific to each iPBX.
It must first be generated by the installer (from AMP).
This code must then be sent to the manufacturer who in turn sends the actual licence.
The detailed procedure is as follows:
Nota : It is better to use Internet Explorer to access AMP; this will make it easier to copy
the values required to generate the licence. See Installation code below.
In Menu TELEPHONY>SYSTEM>Info>Licences, enter successively:
• The identification number
• The IP address of the virtual machine
• The system IID number.
Important : All these fields must be filled in.
• Then click the Installation code generation button.
The installation code frame then gives the value of the installation code.
•Click OK to close the window.
• Log on to the licence server http://support.aastra.fr/akop/external.php
and enter
this installation code.
This server then generates the actual licence for the functions specified during the order.
• Copy this licence (to a .txt file for instance).
Return to the same menu
TELEPHONY>SYSTEM>Info>Licences.
• Enter this licence in the keycode field of this same menu.
The functions in question are then authorised.
It is advisable to store this value in a text file.
If later the characteristics of the IP address and IID number system are modified, the
installation code will be generated following the same procedure.
To Next Page
Loading...
Need help?
General
