Aastra AXD User Manual

AMT/PTD/PBX/0058/4/6/EN Installation and Maintenance Manual - Aastra 5000
Page 172 01/2011 Description des sous-ensembles
4.6.2.2 Indicators
The UCV-L card includes 2 sets of 5 superimposed indicators; each indicator may have
2LEDs:
INDICATOR STATE EXPLANATION
EIP No.1
Lnk/Speed Off
ON green
ON yellow
100 MHz, activity on Ethernet link: EIP daughter card No.1
10 MHz, activity on Ethernet link: EIP daughter card No.1
EIP No. 2 ON green
ON yellow
100 MHz, activity on Ethernet link: EIP daughter card No.2
10 MHz, activity on Ethernet link: EIP daughter card No.2
DISK ON green Disk is being used
SHTD
Linux shutdown
Red flashing
ON green
Off
PBX shutting down
Power off authorisation
Normal operation
RUN (green) On steady
Flashing
Operating problem
Card in operation
AUX (green) On not used
BVF
(green/orange)
Green flashing
ON green or OFF
Run (Voice mail operating)
Voice mail not working (BVF not activated or faulty)
ON orange BVF initialising
S.EXT
(green/red)
ON green
ON red
Off
Correct synchronisation clock (primary network or DECT port)
Synchronisation clock fault alarm
No correct synchronisation clock (primary network or DECT port)
S.DECT
(green/red)
ON green
ON red
Flashing green (slowly)
Flashing green
(average)
Flashing green
(rapidly)
DECT synchronisation correct
DECT synchronisation loss alarm
Received synchronisation not validated
Synchronisation test
Synchronisation successful
MST DECT
(green)
On
Off
Active synchronisation master iPBX
Slave or Master iPBX
LAN
2 LEDs integrated
in the connector
- 1 yellow LED:
Off
On
Flashing
- 1 green/yellow LED:
Off
ON green
ON yellow
Half Duplex link.
Full Duplex link.
Collisions
Link not set up.
Link set up at 100 Mb/s.
Link set up at 10 Mb/s.
TABLEAU 4.17 PRESENTATION OF UCV-L CARD INDICATORS

Aastra AXD Specifications

General

Brand	Aastra
Model	AXD
Category	Server
Language	English