EasyManuals Logo
Home>Aastra>Server>AXD

Aastra AXD User Manual

Aastra AXD
502 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #131 background imageLoading...
Page #131 background image
Installation and Maintenance Manual - Aastra 5000 AMT/PTD/PBX/0058/4/6/EN
Description des sous-ensembles 01/2011 Page 131
4.2.3.3 Monitoring
Two 5 A fuses located upstream from the rectifier are used to isolate the power supply
module in case of overvoltage.
An F300 (6.3 A) fuse inside the power supply module (see Figure 4.5 ) protects the power
supply in case of polarity inversion when connecting the battery.
The converter monitors the voltage on the battery terminals, and stops when this voltage
drops below a threshold set at 43V. This device prevents deep discharging of the battery
in the absence of mains or failure/shutdown of the rectifier.
When the 2 fans are detected as stopped simultaneously, the power supply is cut off
automatically; restarting is possible only through an On/Off sequence.
Figure 4.4 OVERVIEW OF THE ADS 350X MODULE

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Aastra AXD and is the answer not in the manual?

Aastra AXD Specifications

General IconGeneral
BrandAastra
ModelAXD
CategoryServer
LanguageEnglish

Related product manuals