AMT/PTD/PBX/0058/4/6/EN Installation and Maintenance Manual - Aastra 5000
Page 478 01/2011 INSTALLING A5000 SERVER (Non-redundant)
10.8.3 Checking the release of Red Hat Enterprise
To check the installed Redhat release:
• Restart the A5000 Server PC then log on as root.
• Open a terminal window: go to the menu File > Open in a terminal.
• Type in the command: cat /etc/redhat-release
10.8.4 Installing the A5000 Server R5.2 application
Since this phase of the procedure is the same as the one described for a new system, see
Section Installing the A5000 Server application.
The R5.2 licence can be declared using Ctrl + i, or later from AMP, since the R5.1 licence
is not recoverable.
10.8.5 Restoring the R5.1 data
Refer to Section Backing up and restoring the configuration.
To Next Page
Loading...
Need help?
General
