AMT/PTD/PBX/0058/4/6/EN Installation and Maintenance Manual - Aastra 5000
Page 398 01/2011 Maintenance
7.2.5 Restarting
After replacing a sub-assembly on site, it is necessary to perform the following operations
from the AMP:
• Check that the element no longer generates error messages.
• Return it to the same configuration as the old subassembly.
7.2.6 Returning subassemblies to be repaired
Faulty subassemblies are returned to the manufacturer's repair centre, in the exchange
batch reusable packaging, accompanied with a fault sheet describing the anomaly
observed.
7.2.7 List of interchangeable subassemblies, fuses, batteries, cables and secu-
ring kits
The lists of references for the interchangeable main cards and cabinets of the Aastra XS/
XL/XD range are given in the “product bulletin”.
The lists and references of the subassemblies (cards and power supply modules), cables,
fuses, batteries, cabinets and mounting kits are given in Tableau 7.2 to Tableau 7.9 .
To Next Page
Loading...
Need help?
General
