AMT/PTD/PBX/0058/4/6/EN Installation and Maintenance Manual - Aastra 5000
Page 40 01/2011 Présentation
Aastra XD accepts only one physical format of expansion cards: a card with a front panel
(RJ card) fitted with RJ45 connectors.
The CPU card of Aastra XD (UCV-D) exists in a single RJ45 format.
All products in the range have the same width (standard 19''), colours and materials.
2.2.2 Aastra XS/XL
Aastra XS/XL iPBXs are based on a common architecture:
• A main cabinet including:
- The CPU card (UCV), the core of the iPBX, handles basically processing and
switching management tasks; it contains the basic equipment of an iPBX.
- The EXT1-S cards for AXS and EXT1-S12 for AXS12 and EXT1-S6 for AXS6
basically provide the interface with the management devices; they have
management ports.
- Possibly expansion cards for AXS, AXS12, AXS6 and AXL PBXs. These cards
interface with the communication devices and connected networks. They are added
to increase the connection possibilities of:
• An optional expansion cabinet for AXS and AXS12 PBXs and up to two for AXL, each
one connected by a cable to the main cabinet with additional expansion cards.
AXL and AXS/AXS12/AXS6 PBXs accept an expansion card fitted with a front panel (RJ
card) for RJ45 connectors.
The analogue and digital equipment interfaces available on the front panel of the EXT1-S
card in the AXS PBX, EXT1-S12 card in the AXS-12 PBX and the EXT1-S6 card in the
AXS-6 PBX are in (RJ45) format.
All products in the range have the same width (standard 19''), colours and materials.
To Next Page
Loading...
Need help?
General
