Installation and Maintenance Manual - Aastra 5000 AMT/PTD/PBX/0058/4/6/EN
Installation and activation 01/2011 Page 385
6.11.2 ACCESSING THE USER INTERFACE (AMP) VIA AN ISDN MODEM
Configuring the Aastra X series system
In ISDN, since the Aastra X series system is connected to the operator network, you have
to:
• Define a subscriber (by default, subscriber 796).
• Assign an "HSCX modem" set type to this subscriber ("terminals allocation).
• Assign a DID number to the iPBX.
Configuring the remote PC
• On the remote operation PC, there must be an “ISDN modem”.
ISDN modem configuration
The ISDN modem is connected (depending on the models) to the serial port or USB port
of a PC on the operator ISDN line, or on an S0, S2 bus.
Configuring the ISDN modem access on the Aastra X series system
• S0: Call without ID at Yes (menu 414)
Examples of external ISDN modems: Olitec ISDN USB V2 or V3, Bewan gazel 128 USB,
Zyxel omi.net USB.
It is possible to use a PCI card to be integrated in the PC (with driver installation).
Configuring the PPP connection
In Control Panel
Configuring the PPP connection
In Control Panel
• Click " Network connections ".
• Select Create a new connection.
•In New connection wizard, clickNext.
• Tick successively the boxes indicated below:
-In the Network connection type screen, tick Connection to company network.
- Click Next.
-In the Network connectionscreen, tick Remote access connection.
- Click Next.
- Choose the modem type on the list proposed.
- Click Next.
-In the Connection name screen, fill in the Company name field.
- Click Next.
To Next Page
Loading...
Need help?
General
