OverviewControlsDriving hintsCommunication NavigationEntertainmentMobilityReference
221
Proceed similarly to switch off the CB messaging service.
Reading new CB messages
After being sent, CB messages are displayed directly in the
first three lines on your handset.
They remain displayed there until they are e.g. either over-
written by new CB messages or until you call up a menu
with the display controls.
Reading a specific CB topic
If e.g. the automatic display of CB messages is switched
off, or if a message on a desired topic is not currently being
displayed when the handset is set to automatic display,
you can call up specific information from the list of CB
topics.
Call up main menu
Messages 4
Select and confirm
CB Services
Select and confirm
CB Topics
Select and confirm.
Display shows:
CB Topics
01: 0-999
02:
03:
Select the channel number of the desired CB topic, e.g.
01: 0-999
Select
Confirm
Display
Select and confirm.
The latest message on that CB topic is displayed.
DTMF codes
You can also use your car phone to transmit control codes
(DTMF numbers) for accessing network services or for
controlling devices, e.g. for remote monitoring of an
answering machine.
To do this, either the DTMF touchtone must be switched on
permanently, see page 244, or you only transmit the DTMF
codes while a call is in progress, see Sending DTMF codes.
This function may only be used while a connection is
active.
Sending DTMF codes
Enter the number, e.g. of the answering machine to be
monitored
Press.
ba.book Page 221 Thursday, December 19, 2002 8:13 PM
To Next Page
Loading...
Need help?
General
