Print-Quality Troubleshooting 5-43
2
Check image development.
1. Print a Test Print.
2. Turn off the power while printing.
3. Carefully remove the Drum
Cartridge and check the image
formed on the drum right before
the Transfer Roller.
Is the image completely formed
on the drum? Is it clear, black, and
easy to read?
Go to Step 3. Repair or replace the
Transfer Roller
(
page 8-44).
3
Check image transfer.
Check the image formed on the
drum, right after the Transfer Roller.
Is the image completely
transferred on the paper?
Go to Step 4. Repair or replace the
Transfer Roller
(
page 8-44).
4
Look at the print on the paper before
the Fuser.
Does the print on the paper have
even density?
Replace the Fuser
Assembly
(
page 8-76).
Replace the Transfer
Roller (
page 8-44).
Uneven Density Troubleshooting Procedure
Step Actions and Questions Yes No
To Next Page
Loading...
Need help?
General
