10-2 Phaser 5500 Printer Service Manual
Print Engine Plug/Jack Designators
The Plug/Jack locators consist of the P/J Locator Tables and the P/J Locator
Diagrams. The table lists the plug/jack numbers in numerical order. The co-ordinates
column lists the diagram coordinates for the location of the connector. A brief
description of each connection is included in the remarks column.
Print Engine Plug/Jack Designators
P/J Coordinates Remarks
1 D-204 Connects the LVPS and Main Switch Harness.
2 D-243 Connects the LVPS and Finisher Outlet.
3 D-245 Connects the LVPS and Heater Harness.
6 E-245 Connects the LVPS and Fuser AC Harness.
7 E-245 Not Connected
11 D-245 Connects the LVPS and GFI Breaker.
12 D-245 Connects the LVPS and GFI Breaker
20 J-141 Connects the Fuser Main Lamp (Heat Rod) and Fuser Harness.
21 J-141 Connects the Fuser Sub Lamp 1 and Fuser Harness.
22 J-141 Connects the Fuser Sub Lamp 2 and Fuser Harness.
50 F-229 Connects the GFI Breaker and LVPS.
56 B-238 Connects the Power Switch and Power Switch Harness.
57 B-239 Connects the Power Switch and Power Switch Harness.
68 B-239 Connects the Power Switch and Power Switch Harness.
69 B-239 Connects the Power Switch and Power Switch Harness.
72 F-230 Connects the GFI Breaker and Ground (Earth).
73 G-230 Connects the Finisher Outlet and LVPS.
74 G-230 Connects the Finisher Outlet and LVPS.
75 G-230 Connects the Finisher Outlet and Ground (Earth).
100 G-180 Connects the Tray 2 Level Sensor and the Tray 2 Feeder Harness.
101 G-180 Connects the Tray 2 No Paper Sensor and the Tray 2 Feeder Harness.
102 G-180 Connects the Tray 3 Level Sensor and Tray 3 Feeder Harness.
To Next Page
Loading...
Need help?
General
