Fuji Xerox Phaser 5500 User Manual

Wiring Diagrams 10-3
103 G-180 Connects the Tray 3 No Paper Sensor and Tray 3 Feeder Harness.
104 F-167 Connects the Registration Sensor and Registration Harness.
105 F-186 Connects the Feed Out #3 Sensor and Feed Out #3 Sensor Harness.
106 D-183 Connects the LHL Switch and the PH Harness.
107 D-153 Connects the Tray 1/MPT Size Sensor and Tray 1/MPT Sensor
Harness.
108 G-152 Connects the Tray 1/MPT No Paper Sensor and Tray 1/MPT Harness.
109 D-200 Connects the Tray 2 Size Sensor and Size Sensor Harness.
110 D-201 Connects the Tray 3 Size Sensor and Size Sensor Harness.
117 B-134 Connects the OCT Home 1 Sensor and OCT Harness.
118 B-134 Connects the Full Stack Sensor and OCT Harness.
120 H-196 Connects the Door A Interlock Switch and Engine Logic Board.
120 C-119 Connects the I/P Board to the LVPS.
121 C-244 Connects the Front Door Interlock Switch and INTLK Harness.
125 C-106 Connects the Fuser Exit Sensor and PH Harness.
126 D-122 Connects the Drum Cartridge and CRUM Harness.
127 F-108 Connects the Toner Cartridge and CRUM Harness.
130 E-124 Connects the Laser (Scanner) and Laser Harness.
131 B-139 Connects the Center STS and Fuser Outlet.
132 B-139 Connects the 2nd STS and Fuser Outlet.
133 B-139 Connects the Rear STS and Fuser Outlet.
133 H-181 Connects the Tray 2 Pre Feed Sensor and Tray 2 Feeder Harness.
134 H-181 Connects the Tray 3 Pre Feed Sensor and Tray 2 Feeder Harness.
140 F-123 Connects the Laser Assembly and Laser Harness.
150 G-166 Connects the Hum & Temp (Environmental) Sensor and REGI Harness.
150 F-119 Connects the I/P Board to the Front Panel.
160 F-123 Connects the Laser Assembly and Laser Harness.
170 F-123 Connects the Laser Assembly and Laser Harness.
201 E-180 Connects the Tray 2 Feed/Lift Motor and Tray 2 Feeder Harness.
Print Engine Plug/Jack Designators
P/J Coordinates Remarks

Fuji Xerox Phaser 5500 Specifications

General

Brand	Fuji Xerox
Model	Phaser 5500
Category	Printer
Language	English