Fuji Xerox Phaser 5500 User Manual

2-18 Phaser 5500 Printer Service Manual
Toner Dispense Motor
The Toner Dispense Motor drives the Toner Cartridge and dispense tube augers to
deliver toner to the Drum Cartridge.
Laser Assembly
The Laser Assembly interprets signals from the Image Processor Board and scans the
surface of the drum with a dual-beam laser to create a latent image. The dual-beam
laser scans from one end of the drum surface to the other while being turned off and
on forming a single line of a latent image. The resolution of the dual-beam laser is
either 600 dpi or 1200 dpi and is determined by the customer setting. Both beams are
always on. For 600 dpi, both beams receive the same data. For 1200 dpi, the beams
receive different data resulting in a smaller pixel size.
The Scanner Motor turns on when it receives a signal, and turns off after printing
ends. The Scanner Motor remains off in the standby and power-saving states.
s5500-596
Toner Dispense Motor

Fuji Xerox Phaser 5500 Specifications

General

Brand	Fuji Xerox
Model	Phaser 5500
Category	Printer
Language	English