Fuji Xerox Phaser 5500 User Manual

8-42 Phaser 5500 Printer Service Manual
4. Open Door B.
PL4.1.8
Caution
The Take Away Chute is easily damaged if the latches located on the backside of
the chute are not released before attempting to remove the chute from the frame.
Release these latches before attempting to remove the Take Away Chute.
5. Remove the two screws securing the Take Away Chute to the frame.
6. Reach in and release the latch at the center of the Take Away Chute from behind
and remove the chute.
7. Remove the K-clip on the right side, securing the Take Away Roller to the frame.
Caution
The Take Away Bearing and Gear 18T are not captive on the shaft. Use care to
capture these parts as you remove the shaft.
8. Remove the Take Away Roller by moving it in the direction of the arrow.
Bearing Sleeve
Bearing
Take Away Roller
Gear-18T
E-Ring
Take Away Chute
s5500-096

Fuji Xerox Phaser 5500 Specifications

General

Brand	Fuji Xerox
Model	Phaser 5500
Category	Printer
Language	English