Fuji Xerox Phaser 5500 User Manual

FRU Disassembly 8-55
5. Remove the two screws securing the Take Away Chute to the frame.
6. Reach in and release the latch at the center of the Take Away Chute from behind
and remove the chute.
7. Disconnect the connector from the Feed Out Sensor.
8. Release the hook securing the sensor to the Take Away Chute and remove.
Replacement Note
When installing, fit the bosses on the Take Away Chute into the holes on the
frame.

Fuji Xerox Phaser 5500 Specifications

General

Brand	Fuji Xerox
Model	Phaser 5500
Category	Printer
Language	English