Name: Garmin G1000 Diamond DA42NG
Brand: Garmin
Rating: 4 (1 reviews)

To Next Page

To Previous Page

190-00962-02 Rev. A

Garmin G1000 Pilot’s Guide for the Diamond DA42NG

120

AUDIO PANEL AND CNS

SYSTEM

OVERVIEW

FLIGHT

INSTRUMENTS

EIS

AUDIO PANEL

& CNS

FLIGHT

MANAGEMENT

HAZARD

AVOIDANCE

AFCS

ADDITIONAL

FEATURES

APPENDICESINDEX

FLIGHT ID REPORTING

NOTE: If the Flight ID is required but the system is not conﬁgured for it, contact a Garmin-authorized service

center for conﬁguration.

WhentheFlightIDmustbeenteredbeforeightoperation,theidentierisplacedintheTimer/References

WindowonthePFD.TheFlightIDisnottoexceedsevencharacters.Nospaceisneededwhenentering

FlightID.WhenaFlightIDcontainsaspace,thesystemautomaticallyremovesituponcompletionofFlight

IDentry.

Entering a Flight ID:

1) Press the TMR/REF Softkey to display the Timer/References Window.

2) Press the FMS Knob to activate the selection cursor, if not already activated.

3) Turn the large FMS Knob to scroll down to the Flight ID.

4) Turn the small FMS Knob to enter the desired Flight ID.

5) Press the ENT Key to complete Flight ID entry.

IfanerrorismadeduringFlightIDentry,pressingtheCLRKeyreturnstotheoriginalFlightIDentry.While

enteringaFlightID,turningtheFMS Knob counterclockwise moves the cursor back one space for each detent

ofrotation.IfanincorrectFlightIDisdiscoveredaftertheunitbeginsoperation,reenterthecorrectFlightID

using the same procedure.

Figure 4-45 Timer/References Window, Entering Flight ID

Flight ID

PFD Entry

Questions and Answers:

Need help?

Do you have a question about the Garmin G1000 Diamond DA42NG and is the answer not in the manual?

Garmin G1000 Diamond DA42NG Specifications

General