Garmin G1000 Pilot’s Guide for the Diamond DA42NG
190-00-00962-02 Rev. A
312
HAZARD AVOIDANCE
SYSTEM
OVERVIEW
FLIGHT
INSTRUMENTS
EIS
AUDIO PANEL
& CNS
FLIGHT
MANAGEMENT
HAZARD
AVOIDANCE
AFCS
ADDITIONAL
FEATURES
APPENDICESINDEX
6) Enter the access code provided by Garmin Flight Data Services in the ‘ACCESS CODE’ field.
7) Press the ENT Key. ‘REGISTER’ will now be highlighted as in Figure 6-55.
8) Press the ENT Key. The system will contact Garmin Flight Data Services. System registration is complete when
‘REGISTERED’ is displayed in the STATUS field.
ACCESSING WORLDWIDE WEATHER PRODUCTS FROM GFDS
TheprincipalmapforviewingGFDSWeatherdataistheWeatherDataLink(GFDS)PageintheMapPage
Group(Figure6-56). This is the only map display capable of showing information for all available GFDS
WorldwideWeatherproducts.Thispageisalsousedtoselectaweatherdatalinksource,ifmorethanone
sourcehasbeeninstalled.Thispageisalsousedtoselectaweatherdatalinksource,ifmorethanonesource
hasbeeninstalled.Thedisplayedweatherproductsandsoftkeyscorrespondtotheselectedweatherdatalink
source.NoGFDSweatherdataisdisplayeduntiltherstGFDSWeatherDataRequestismade.
Viewing the Weather Data Link (GFDS) Page:
1) Turn the large
FMS
Knob to select the Map Page Group.
2) Turn the small
FMS
Knob
to select the Weather Data Link (GFDS or XM) Page.
3) If the page title displays ‘MAP - WEATHER DATA LINK (XM)’ and GFDS data is desired, proceed to the next step
to change the weather data link source to GFDS.
4) Press the MENU Key.
5) Turn the FMS Knob to highlight ‘Display GFDS Weather’ and press the ENT Key. Page title displays ‘MAP -
WEATHER DATA LINK (GFDS)’ to indicate GFDS is the selected weather data link source.
Onlyoneweatherdatalinksourcemaybeselectedfordisplayatatime.
To Next Page
Loading...
Need help?
General
