Revision C CASE 7-17
2060290-201
Post Test Review
Report Printout
Click the Print button to print the report. The print setup window opens
where you can temporarily adjust the settings for the printout. Refer to
section “Miscellaneous Tab” on page 12-33 for details on changing the
setup permanently.
1. Select the documents to be included in the report
Standard Page (Test Information, Statistics Summary, Graphics)
Tabular (all measured values in tabular format)
Hourly Averages (tabular and graphics format)
Statistics Summary (Statistics Summary as histogram,
minimum, maximum and mean values, standard deviation)
Phases (same as Statistics Summary, but divided into day time,
wake-up time and night time)
ECG Strips (all ECG strips in chronological order,
TONOPORT IVa)
Configured Report
2. Select the number of copies to print.
3. Select a report format (click Modify... to display the Report Editor,
see section “Report Editor” on page 12-10).
4. Select the printer.
5. Click the Print button to initiate the printout.
To Next Page
Loading...
Need help?
General
