Revision C CASE 8-15
2060290-201
Post Test Review
The Modify... buttons allow you to edit or complete the data in the
respective areas, as described below:
Patient Information
The Patient Information window opens. You can only enter or correct
data that does not affect the calculation of reference values.
Test Information
The Test Information window opens (see “Entering Test Information” on
page 8-4).
Note
The Test Information is not assigned to the patient, but to the test
data.
FVC Measurement
Click the FVC Measure. tab to display the acquisition screen with the
corresponding flow-volume loop and the measuring values. The status
line indicates the ambient conditions set at the time of the measurement.
N Click to return to the initial screen.
To Next Page
Loading...
Need help?
General
