9-12 CASE Revision C
2060290-201
Working Temporarily with the Local Database
Working Temporarily with the Local Database
Note
This feature is not available if one of the following options is enabled:
DICOM option (DICM)
EMR option (XEMR)
Request MUSE data
Floating License
If you wish to work temporarily with the offline (local) database (house
call), you can copy the patient list (without any examinations) to the local
database. This can be done manually or automatically.
Manual
1. Connect the PC to the data network.
2. Click System Configuration to display the system configuration
menu.
3. Click Database...
4. In the Database Setup window select use offline database.
The patient list without the corresponding examinations will be copied to
the local database.
Now you can disconnect the PC from the data network and continue
working with the local database as usual, i.e., you can select a patient
and perform a test or admit a new patient to perform a test.
When you have finished working with the local database, reconnect the
PC to the network and deselect the use offline database check box: new
tests as well as new patients for whom tests exist will be copied to the
database on the server.
To Next Page
Loading...
Need help?
General
