Revision C CASE 12-39
2060290-201
Custom Setups, Factory Setup
Load or Delete
1. Select the drive.
2. Select the name.
3. Click Load to load the setup, or click Delete to delete the setup.
Note
Be sure to save the current setup BEFORE loading one of the stored
setups, or your modifications will be lost.
With some bicycle ergometers, restoring the Factory Setup will
delete your own exercise test protocols and phases.
The following parameters cannot be loaded, stored or reset to the
factory defaults.
Exercise Tests
Remote View
thermal writer port
Spirometry Tests
ambient conditions
System Configuration
all settings on the General tab
Load the Factory Setup
1. Click the Custom Setup button on the acquisition or pre-acquisition
screen, or on the General tab of the System Configuration.
2. Scroll to the bottom of the list box.
3. Select Factory Setup.
4. Click Load to load the setup.
To Next Page
Loading...
Need help?
General
