Revision C CASE 4-3
2060290-201
Selecting a Patient Record from the Local Database
Selecting a Patient Record from the Local Database
Overview
Note
Before running a new test, you are required to select a patient record
from the database or to enter a new patient. Depending on the
system configuration you will be working with the local database of
the system or with the database of the MUSE system. When you
select New Test on the initial screen, a window opens where you
select the patient record and test type or enter a new patient.
AClick next page/previous page to display more patient records.
B The bar cursor highlights a patient record.
C Text boxes for the patient's Last Name/Patient ID.
D Option buttons for selection of the test type (see “Devices Tab” on page 12-53).
EClick New Test to select the highlighted patient and go to the acquisition screen of
the selected test type.
FClick New Patient to activate the area for entry of patient information.
GClick Delete to delete the highlighted patient record from the database.
HClick Cancel to clear the window.
IClick Accept to save the new or edited patient information to the database.
J Area for entry of patient information.
To Next Page
Loading...
Need help?
General
